|
| |
PTAC Units
Packaged Terminal Air Conditioner (PTAC) and Heat Pump (PTHP) products provide year-round comfort in multi-room, multi-story buildings such as hotels/motels, office buildings, apartments, dormitories, hospitals, nursing homes and schools.
|
 |
For other products, please visit our supplier's website at:
|
|
Bypass Terminal Units
Series BP-500 Bypass Air Terminals are designed to achieve VAV delivery of conditioned air to a room in single duct, constant volume air distribution systems.
|
|
Retrofit Terminal Units
Series RA retrofit assemblies are customized retrofit valves designed to slip into existing mechanically regulated single or dual duct terminals to convert to convert to variable volume operation.
|
|
Dual Duct Terminal Units
Series DD-500 Dual Duct air terminals are designed to regulate the flow of conditioned air in dual duct air distribution systems. In a dual duct system, both heated and cooled air are provided to the air terminal and mixed to provide the desired discharge temperature. The DD-500 is available with a wide range of standard control sequences.
|
|
Parallel Fan Powered Air Terminal Units
Series FVL-500 fan-powered terminal units are designined to provide superior comfort control to zones with both heating and cooling requirements. The fan in a variable volume (or paralell) fan powered terminal, runs only upon requirements for heat.
|
|
High Performance Single Duct
Deisgned to regulate the flow of conditioned air in single duct air distribution systems; feature low leakage single blade damper; available with electric/pneumatic controls
|
|
For other products, please visit our supplier's website at:
|
|
Horizontal High Performance HP Series Fan-Coil Units
The HP unit‘s array of options and number of available
sizes render unparalleled flexibility. Ranging from 600 to
2400 CFM, eight unit sizes allow the HP to accurately match
the room-load requirements. Available with chilled-water
or DX cooling coils and hot-water, steam or electric heating
coils. HP Series fan coils produce the ultimate in comfort and
flexibility.
|
|
Vertical Floor Mounted VF Series Fan-Coil Units
The VF unit’s impressive list of standard features provides
unparalleled design flexibility. Units may be configured
with double-deflection or linear-bar discharge grilles. The
return-air space on exposed-cabinet models may be fitted
with a stamped-louver grille, powder-coat-painted to match
the unit. Outside air can be introduced with manual or
motorized dampers, or a wall-box assembly.
The coils and drain pan may be reversed in the field to allow
piping connections on either side. Available with chilled-water
or DX cooling coils, and hot-water, steam or electric heating
coils, VF units produce the ultimate in comfort and flexibility.
|
|
Vertical Hi-Rise VH Series Fan-Coil Units
Riser-slot knockouts are included
on the left, right and back panels. Supply-air-opening
knockouts are included on all sides, as well as the top of
the unit. Outside air can be introduced with manual or
motorized dampers.
Coil options allow for three or four-row chilled-water and
one or two-row hot-water coils in the reheat position. A
total of five rows of coil are accommodated.
|
|
For other products, please visit our supplier's website at:
|
|
Fabric Air Dispersion Systems
DuctSox Systems are attractive and cost effective. They are constructed of fabric - shaped as cylindrical tubes, half-round or quarter panel. DuctSox are used to distribute and diffuse heated, cooled, refrigerated and make-up air. Fabric duct offers a variety of benefits the traditional solution often cannot.
|
|
For other products, please visit our supplier's website at:
|
Commercial & Industrial HVAC Filtration
AAF International has everything from inexpensive disposable panel filters to high-efficiency, extended surface filters with antimicrobial and gas-phase filtration.
|
|
For other products, please visit our supplier's website at:
|
Access Doors
Ruskin Access Doors enable access into ducts without compromising safety or ventilation. Ruskin has a wide variety of doors to meet different duct styles and application needs.
|
|
Dampers
Ruskin works with a variety of materials, including galvanized steel, stainless steel, aluminum and fiberglass to match your exact specifications. By molding and forming these materials, Ruskin constructs the perfect damper for your needs.
|
|
Air Measuring Products
Ruskin’s complete line of air measuring and IAQ product are designed with the latest code requirements in mind. From total monitoring and control of the air to simple measurement of the airflow at various points within the system, Ruskin has a product that has been designed to fit the application.
|
|
For other products, please visit our supplier's website at:
|
 |
