|
| |
Luminous Heaters
Schwank infrared radiant luminous heaters are ideal for space heating, spot heating, and process heating. They work on a direct fired basis - the infrared energy is radiated by a ceramic tile that is heated by flame established at the hundreds of ports in the tile.
|
|
Tube Heaters
Schwank radiant tube heaters are ideal for a wide range of heating applications. Dusty or negative air can be ducted to the burner for safe and trouble-free sealed combustion.
|
|
For other products, please visit our supplier's website at:
|
|
Convectors
Sigma Convectors are available in a number of cabinet
styles to suit any building interior. Convectors can be specified as slope top, flat top, fully or semi-recessed.
In addition, all styles are available as either above-floor mount or as floor-mounted units with either full inlet grille or with arched inlet. Cabinets match industry-standard dimensions in height and in length.
|
|
Force Flow Heaters
Sigma force flow cabinet unit heaters are styled to fit into any room and provide efficient, individualized room temperature control. They have been designed so that as the unit size increases, the depth and height of the units remains constant. Only the length of the unit increases with capacity, resulting in uniform heights between models.
|
|
Unit Heaters
Sigma horizontal and vertical propeller unit heaters feature a wide performance range for both hot water and steam applications. The performance range is consolidated to reduce the number of different models, simplifying the selection, ordering and installation activities.
|
|
For other products, please visit our supplier's website at:
|
|
Unit Heaters
L.J. Wing Steam/Hot water Unit Heaters are mounted in the truss or ceiling areas. They deliver heated air to floor levels using either revolving discharge (type HCR) or fixed discharge (type HCF). Positrack gear-driven revolving discharge provides uniform air distribution projecting the air from mounting heights of up to 73 feet while maintaining near zero stratification.
|
|
High Level Circulators
L.J. Wing High Level Circulators (HLC) draw in, and then redistribute to the floor, heat that normally would be wasted through the roof and upper walls. HLC units maintain an extremely low floor to ceiling temperature differential. The revolving discharge provides uniform air distribution projecting the air downward around structures, machinery, stacked materials or any obstacles. Air at the working level is kept gently on the move so no hot or cold spots can develop.
|
|
Steadyair - Air Tempering Package
This L.J. Wing heating and ventilating modular package provides you with new levels of operating reliability and system flexibility. It features all the advantages of the popular L.J. Wing IFB type Integral Face and By-Pass coil constant volume, positive freeze protection, accurate temperature control, elimination of stratification, and single source responsibility. Airflow deliveries from 1,000 to 40,000 CFM.
|
|
MV-Series Multi-Header Vertical Face & Bypass Coils
L.J. Wing’s multi-stage face and bypass coils provide greater temperature control flexibility and offer more reliable VAV operation. Greater freeze protection and ease of installation than any other coil available is an added benefit of the new MV-series coils. The multiple headers, controlled by slow acting on/off valves, provide close control of steam or hot water volume in the coils, allowing better control in VAV (variable air volume) systems. With increased damper control the MV-series coils also minimize temperature stratification and freezestat trips in mild weather.
|
|
For other products, please visit our supplier's website at:
|
|
|
 |
